TAJIMA GOLD MAG 25 measuring tape 5.5m with magnets

Produkt-Beschreibung

TAJIMA Gold Mag measuring tape 5.5m with 2 magnets.

Armored case protected with elastic resin for shock absorption and highest durability.
Comes with "quick release" belt holder and a strap.

Tape length : 5,5 m
Tape width : 25 mm
Size : 70 mm x 80 mm x 50 mm
Weight : about 320 grams
Tape horizontal resistance : 2,4 m

Easy to read with a non reflective white tape printed on both sides with large, clear numbers and graduations.

On the beginning of the tape, there are 2 strong neodymium magnets for versatile use. They can be used on both sides. If you connect the magnets to a metal from the outside, please reduce 1,6mm from the measured value. (thickness of the magnet)

Tape made of tempered steel.

Maximale verfügbare Menge erreicht.

Based on 1 review Write a review

SHINWA minisukoya TRY square Brass

¥1,295

Shinwa TRY Square 4.5 cm, 6 cm, 7.5 cm, 9 cmMade of stainless steel and brass. Size 4.5 cm 62020 : 45 mm x 40 mm x 6 mmWeight : about 25 gramsAccuracy : ± 0.04 mm or less per 45 mm Size 6 cm 62021 : 60 mm x 45 mm x 6 mmWeight : about 30 gramsAccuracy : ± 0.06 mm or less per 60 mm Size 7,5 cm 62022 :75 mm x 52 mm x 6 mmWeight : about 45 gramsAcc...

Size

4.5cm

6cm

7.5cm

9cm

All 4

Mehr Info

SHINWA Square Layout Miter ruler 45 + 90 Degrees 62113 aluminum Japan Japanese tool woodworking carpenter

SHINWA Square Layout Miter 45 + 90 Degrees 62113

¥1,895

SHINWA Square Layout Miter 45 + 90 Degrees 62113

¥1,895

Shinwa layout square miter ruler 62113 for45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 73 mm x 63 mmWeight : about 100 gramsMade of aluminum, light and durable. Made in Japan.

Marking gauge Kebiki with 2 blades

¥2,695

Marking gauge Kebiki with 2 blades

¥2,695

Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...

SHINWA precision Try Square 62009

¥1,995

SHINWA precision Try Square 62009

¥1,995

Shinwa Try square 62009. Well deep-etched readable metric graduation on both sides.Size : 175 mm x 100 mm x 8 mmWeight : about 110 grams Accuracy : ± 0.1 mm or less per 100mmMade of stainless steel.

SHINWA pick up ruler scale 15cm 30cm Stainless 13131 13134

SHINWA pick up ruler 15cm 30cm

Ab ¥695

SHINWA pick up ruler scale 15cm Stainless 15cm 13131

SHINWA pick up ruler 15cm 30cm

¥695

Shinwa Pick up scale ruler with well deep-etched readable graduation. The silver-colored finish reduces reflection on the surface and makes it easy to read. The end of the ruler is bent for an easier pick up.Made of stainless steel with an accuracy of ±0,15 mm Size 15 cm 13131 : 175 mm x 15 mm x 0.5 mm Weight : about 10 grams Size 30 cm 13134...

Size

15 cm

30 cm

15 cm + 30 cm

Mehr Info

SHINWA Square Layout Miter ruler 45 + 90 Degrees carpenter 62081 stainless Japan Japanese tool

SHINWA Square Layout mitre 45 + 90 Degrees 62081

¥1,895

SHINWA Square Layout mitre 45 + 90 Degrees 62081

¥1,895

Shinwa carpenter layout square miter ruler 62081 for 45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 100 mm x 15 mmWeight : about 220 gramsMade of stainless steel.

SHINWA sliding adjustable angle bevel 150mm 250mm 6 + 10 inches 62596 62588 Japan Japanese tool

SHINWA sliding angle bevel 150mm 250mm

Ab ¥1,395

SHINWA sliding adjustable angle bevel 150mm open japan

SHINWA sliding angle bevel 150mm 250mm

¥1,395

Shinwa 150 mm 250 mm sliding bevel 150mm 62588 : Size : 182 mm x 14 mm x 20 mmWeight : about 110 grams 250mm 62596 :Size : 250 mm x 19 mm x 20 mmWeight : about 200 gramsMade of stainless steel.

Size

150mm

250mm

150mm + 250mm

Mehr Info

Marking gauge Kebiki with 2 blades Japan dual cutter Fujiwara tool Japanese woodworking

Marking gauge small Kebiki with 2 blades

¥3,195

Marking gauge small Kebiki with 2 blades

¥3,195

Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.

SHINWA 11215 Stainless Carpenter's Framing Square 30cm Made in Japan

SHINWA 11215 Framing Square 30cm

¥2,995

SHINWA 11215 Framing Square 30cm

¥2,995

Shinwa Framing square 11215 Well deep-etched readable graduation on both sides.Outside : 300 mm x 150 mmInside : 250 mm x 100 mm Accuracy : ± 0.1 mm or less per 100 mmTotal size : 320 mm x 160 mm x 2 mmWeight : about 140 gramsMade of stainless steel.Made in Japan.

SHINWA Protractor No.19 198mm ⦰90mm Stainless steel 62490 Japan Japanese tool

SHINWA Protractor No.19 20cm Stainless steel 62490

¥1,795

SHINWA Protractor No.19 20cm Stainless steel 62490

¥1,795

Shinwa 62490 20 cm protractor.Size : 198 mm x 50 mm x 15 mm⦰90 mmWeight : about 80 gramsMade of stainless steel.

SHINWA 150mm caliper calliper rule precision 0.05mm 19899

SHINWA 150mm caliper ruler 0.05mm 19899

¥4,895

SHINWA 150mm caliper ruler 0.05mm 19899

¥4,895

Shinwa 15cm caliper 19899 0-150 mm with a precision of :± 0,05 mm from 0 to 50 mm± 0,06 mm from 50 to 100 mm± 0,07 mm from 100 to 200 mm Size : 235 mm x 75 mm x 7 mmWeight : about 150 gramsMade of stainless hardened steel.

SHINWA 150mm moulage gauge model 77970

¥1,795

SHINWA 150mm moulage gauge model 77970

¥1,795

Japanese 150 mm Shinwa moulage gauge profile contour profile templates 77970.This is the small model. Size : 150 mm x 84 mm x 18 mmWeight : about 230 gramsNeedles : 84 pieces x 0,8 mm (84 mm long)Maximum size you can copy : 148 mm x 49 mm Made in Japan.